Metal Strip, Shaped Wire, Engineered Shapes & Thermal Management

  • Metal Strip: Nickel, Nickel-Iron, Nickel-Chrome, Cobalt and Pfinodal, Titanium, and High Purity Iron)
  • Specialty Shaped Wire: Stainless Steel, Copper, Brass, Nickel, High Temp alloys, & Aluminum
  • Thermal Management Materials: Molybdenum-Copper, Tungsten-Copper, and Aluminum-Silicon Carbide
  • Engineered Shaped Components: Plate, Rod, Tube & Near-Net Shape alloys including Pfinodal (Cu-Ni-Sn), Titanium (CP & Ti 6/4), Nickel, Nickel-Iron & Cobalt Alloys

Metal Alloys Powders & Clad Plate

  • Structural Steel Powders: 300 series, 400 series, Specialty alloys
  • Sintered Metal Filter Powders: Stainless steels, Hastelloys, Monels, Inconels, Nickel and Titanium
  • Metal Injection Moulded Parts: Austenitic, Ferritic, and 17-4 Precipitation Hardened Stainless Steels, Specialty grades
  • Stainless Steel Flake: Fine Leaf Grade (averages 25 microns), Standard Leaf Grade (averages 50 to 60 microns), Stainless Steel Paste (Special grade with 10% mineral spirits)
  • Thermal Spray Powders (Plasma & HVOF)
  • Clad Plate: Stainless Clad Aluminum, Nickel Clad Steel, Stainless Clad Steel, A276 clad Steel, Inconel Clad Steel in various lengths and widths from 3/16” to 1” thick

Master Alloys, Titanium Powders and Gas Atomized Powders

  • Master Alloys for Titanium and Superalloy melting: Vanadium, Molybdenum, Niobium, Chrome, Multi-Component
  • High Purity Titanium Powders: CP Ti Hydride, Ti 6A/4V, Magnesium and Sodium reduced Ti Sponge
  • Gas Atomized powders: Brazing and Thermal Spray Powders

Precision Strip and Foil

  • Stainless and heat resisting steels
  • Constantan, Evanohm® R and Platinum-Tungsten
  • Nickel and high-nickel alloys
  • Nickel-based superalloys
  • Cobalt-based superalloys
  • Precision resistance and strain-gage alloys
  • Copper and copper alloys
  • Titanium CP Grades 1, 2, 4 and 9
  • Controlled-expansion alloys
  • Thickness from 0.060”(1.5mm) down to 0.000060" (1.5 microns)

High Precision Metal Tubes

  • Precision Metal Tubing: High performance Stainless Steel, Titanium and Nickel alloys
  • Seamless, welded or welded & redrawn tubes with outside diameters from 1 mm (0.040 in) up to 45 mm (1 5/8 in) OD
  • Straight lengths up to 65 ft. (20 m) and coils manufactured up to 33,000 ft. (10,000 m) long
  • Wall thicknesses from 0.05 mm (0.002 in) up to 3.8 mm (0.150 in)

Small Diameter Precision Metal Tubes

  • Small Diameter Tubes: High performance Stainless Steel, Titanium, Zirconium and Nickel alloys
  • Seamless, welded or welded & redrawn tubes with outside diameters from 0.25 mm (0.010 in) up to 31.75 mm (1.25”)
  • Straight lengths up to 45 ft. (14 m) and coils manufactured up to 3,200 ft. (975 m) long
  • Wall thicknesses from less than 0.05 mm (0.002 in) up to 3.8 mm (0.150 in)